Compress is a signal processing control on some ultrasound systems that affects the gray scale and overall gain.

Echogenicity is the ability of a medium to create an echo, for example to return a signal when tissue is in the path of the sound beam. The ultrasound echogenicity is dependent on characteristics of tissues or contrast agents and is measured by calculating the backscattering and transmission coefficients as a function of frequency.
The fundamental parameters that determine echogenicity are density and compressibility. Blood is two to three orders of magnitude less echogenic than tissue due to the relatively small impedance differences between red blood cells and plasma. The tissue echogenicity can be increased by ultrasound contrast agents. Encapsulated microbubbles are highly echogenic due to differences in their compressibility and density, compared to tissue or plasma.
Microbubbles are 10,000 times more compressible than red blood cells. The compressibility of air is 7.65 x 10−6 m2/N, in comparison with 4.5 x 10-11 m2/N for water (on the same order of magnitude as tissue and plasma). This impedance mismatch results in a very high echogenicity. An echo from an individual contrast agent can be detected by a clinical ultrasound system sensitive to a volume on the order of 0.004 pl.

See also Isoechogenic, Retrolenticular Afterglow, and Sonographic Features.

The wavelength is a unit of relative distance equal to the length of a wave. This could be a light wave, a radio wave, or even a sound wave. For sound waves the formula is:
l=c/f (wavelength = propagation speed/frequency)
In ultrasound imaging is the wavelength the distance between the onset of peak compression or cycle to the next. The wave propagates as bands of compression and rarefaction. One wavelength is the distance between two bands of compression, or rarefaction. Maximum compression corresponds to maximum pressure. The wavelength (see also Angstrom) is important in image resolution.

See also Spectral Reflector.

Ultrasound elastography is a specialized imaging technique that provides information about tissue elasticity or stiffness. It is used to assess the mechanical properties of tissues, helping to differentiate between normal and abnormal tissue conditions.
The basic principle behind ultrasound elastography involves the application of mechanical stress to the tissue and measuring its resulting deformation. This is typically achieved by using either external compression or shear waves generated by the ultrasound transducer.
There are two main types of ultrasound elastography:
Both strain elastography and shear wave elastography offer valuable insights into tissue characteristics and can assist in the diagnosis and characterization of various conditions. In clinical practice, ultrasound elastography is particularly useful for evaluating liver fibrosis, breast lesions, thyroid nodules, prostate abnormalities, and musculoskeletal conditions. By providing additional information about tissue stiffness, ultrasound elastography enhances the diagnostic capabilities of traditional ultrasound imaging. It allows for non-invasive assessment, improves the accuracy of tissue characterization, and aids in treatment planning and monitoring of various medical conditions.
See also Ultrasound Accessories and Supplies, Sonographer and Ultrasound Technology.

Peripheral veins are easily tested using a 5 to 10 MHz transducer. The venous walls are smooth, thin, and compressible. Venous ultrasound imaging requires the compression of the veins in the transverse view. If compression is performed in the longitudinal view, the vein may roll away from the transducer possibly creating a false-negative examination.
The lumen of the normal vein is echo free. Increasing the gain will display low level echoes representing venous blood moving towards the heart. When performing Doppler spectral analysis or color Doppler the gate should be placed in the center of the vessel. In case of a non-obstructing or recanalized thrombosis, the Doppler gate should be placed within the remaining vessel lumen for flow detection.

See also Maximum Venous Outflow and Zero Offset.