The amplifier is the component of the ultrasound scanner that amplifies the returning signals and prepares them to be displayed.

(ADC) A system that receives analog input data and produces digital values at its output. Analog to digital converters are used by the ultrasound scanner to convert the received signal into a format more compatible with the computer systems.
Ultrasound front-end-systems as well as many others sophisticated electronic systems use these analog signal processing components in connection with e.g., low-noise amplifier (LNA), and time gain compensation amplifier (TGC) as key elements in determining the overall system performance.

See also Digital to Analog Converter, and Digitization.

(DAC) Part of the interface that converts digital numbers from the computer into analog (ordinary) voltages or currents. In ultrasound systems e.g., the high voltage transmit amplifiers that drive the transducers might be controlled by digital to analog converters (DACs) to shape the transmit pulses for better energy delivery to the transducer elements.

The gain is a linear factor that is used in a device as a multiplier after calibration. The gain is the ratio of input to output in an amplifier. The sensitivity of a probe is adjusted by changing the gain.

See also Compress, and Reject.

A narrow or tuned Bandwidth describes a small frequency spectrum of pulses. With the Fourier transformation method a pulse or amplifier can be subscribed with its bandwidth. It is usually expressed with a 6dB drop of maximum amplitude, subscribing the bandwidth between the edges of the curve.
The selection of bandwidth is essential for achieving certain test results; narrow bandwidth for highly sensitive scans or broad banded for high resolution scans. The fast Fourier transformation uses beside the echo amplitude evaluation method the capability of the echo frequency / bandwidth information.